Procedures for car audio installation.

When you have a new car, usually the head unit (tape) is still a standard tape. Usually it is still a standard tape cassette instead of CD / DVD, want to buy a head unit that is complete but alas no sufficient funds to buy a tape that can play DVD / CD moreover is equipped with USB ports.

Want to buy a second item price around IDR400.000, but if you have the expertise to install the tape itself will probably save about IDR50.000, quite right ....
For those of you who do not know the procedures for installing, here I give a little guidance.
First open the dashboard of your car, it is a bit risky if you've never opened it. But if your car is kind of like the Toyota Avanza, rush, Corrola, Soluna, such daihatsu xenia, Terios, Mitsubisi like horses, cadets rather easy because the bolt seen clearly even Avanza, xenia, rush using the buttons alone, but need care is - attention also to open it.

If the car kind of grand max, honda jazz, the CR-V has a secret bolt in it. You must open the other components in order to look "secret bolt" it. Toyota deer must open the dashboard everything, while isuzu panther, Terios, futura wear sleeve, not wearing any bracket that live withdrawn. (For more I'll make an ebook on how to open the dashboard in detail with accompanying drawings so that you can do easily, pray for me yah)
Once opened and can remove the head unit. Hurry socket was behind it. Cut all the wires one - by one do not coincide, because there is one containing a stun allowing a short circuit occurs. Then take the socket head unit that will be installed, if the color is the same as the old cable connected tingga wrote. However, if this is different color guidelines
Red: Acc
Yellow: stun directly
Black: mass / ground
Grey: front right (+)
Grey strips: front right (-)
White: front left (+)
White stip: front left (-)
Purple: rear right (+)
Purple strip: right rear (-)
Green: rear left (+)
Green stip: rear left (-)

There are also different wire colors, but rarely on the market
Red: Acc
Yellow: stun directly
Black: mass / ground
Grey: front right (+)
Grey strips: front right (-)
Green: front left (+)
Green stip: front left (-)
Blue: rear right (+)
Blue strip: right rear (-)
Brown: left rear (+)
Brown stip: rear left (-)
0 Comments for "Procedures for car audio installation."

Back To Top